Neve 81/82 PSU Kit
€40.00
Tax included
This kit allows to built a power supply specifically designed for Neve 81/82 series Preamp and Equalizer modules to put them in a rack. This Kit is designed to supply two pairs of Preamp & EQ. This card provides the -/+ 22V PSU and the 48V regulated phantom needed for operating the Neve 81/82 Preamp and EQ modules
The supplied voltages are: + 22V / -22V / + 48V
Minimum housing height = 2U
Available as a PCB, complete kit or Built and tested.
Select your option
Each Neve 81 channel is equipped with +/- 18V regulators. These regulators must be supplied with filtered voltages of +/- 22V.
This FPSU card takes care of the rectification and filtering of the AC voltage. It provides the +/- 22V supply voltages as well as a regulated +48V phantom power supply required to operate the Neve 81/82 preamp and equaliser.
The design and the components used for this power supply allow to obtain excellent results.
Easy to place in a rack thanks to its optional hanging system.
The PSU bus strip power supply allows for easy and clean wiring of multiple channels.
This card can power up to 4 preamp/equalizer pairs.
Minimum housing height = 2U
1 FPSU board
This card is responsible for rectifying and filtering the AC voltage. It provides the regulated +48V phantom power supply voltage.
1 FPSU-VREG Labo K Effects bracket
Connectors and components
The 2x15V transformer is sold separately.
9 Items
Data sheet
- DC Voltage
- +/- 22V
- Phantom PSU
- 48V 300mA
- Transformer required
- 2 x 18V 50VA
You might also like
This kit allows to built a power supply specifically designed for Neve 81/82 series Preamp and Equalizer modules to put them in a rack. This Kit is designed to supply two pairs of Preamp & EQ. This card provides the -/+ 22V PSU and the 48V regulated phantom needed for operating the Neve 81/82 Preamp and EQ modules
The supplied voltages are: + 22V / -22V / + 48V
Minimum housing height = 2U
Available as a PCB, complete kit or Built and tested.
Select your option