FX INSERT by Labo ★ K effects
search
  • FX INSERT by Labo ★ K effects
  • FX INSERT by Labo ★ K effects
  • FX INSERT by Labo ★ K effects
  • FX INSERT by Labo ★ K effects

FX INSERT by Labo ★ K effects

€195.00
Tax included

FX Pedal Insertion Version 500

This module allows the use of guitar effect pedals via the inserts of analogue mixers or soundcard interfaces.
This allows effects to be added to recorded tracks.

The high impedance outputs can also be used to drive an amp directly for reamping.

The high impedance inputs can also be used as a direct box to record the instrument directly onto a track.

Power supply output adjustable from 5V to 12V

Quantity
Special offer 2nd half of December!

FX Pedal Insertion Version 500

This module has a +4dB line input which provides a high impedance output with gain control to drive an effects pedal input via a jack connector.
A high impedance jack input allows the pedal output to be picked up and then via a volume control, to drive a balanced +4dB output stage.

This output feeds the insert return of the mixer or interface.
All guitar effects (wha-wha, disto, delay etc...) can be used.
The high impedance outputs can also be used to directly drive an amp for reamping. The high impedance inputs can also be used as a direct box to record the instrument directly to a track.

The icing on the cake is a 9V power supply output via a standard connector on the front panel. This power supply has a voltage control with LED voltmeter. The voltage range goes from 5V to 12V, which allows you to get particular sounds on certain pedals, especially distortions or fuzz (battery wear simulation).

12 Items